Graf one2clean Service Instructions Manual

Hide thumbs Also See for one2clean:

Table of Contents

Download this manual

service code

Code: 2013

Language

Table of Contents

Need help?

Do you have a question about the one2clean and is the answer not in the manual?

Page 1 service code Code: 2013 Language...
Page 2 1. Service menu code 1. Service menu code Control times can only be altered in the service menu. The code for this is 2013 2. Service level A range of queries can be run at service level, including the configuration of settings. To reach the service level, select the menu point “Service menu”...
Page 3 2. Service level one2clean 4EW C The stored basic setups are retrieved one after the other using the arrow keys. The desired basic setup is confirmed with , then the successful selection is confirmed with a 2-second display of “OK”.
Page 4 2. Service level The number can be increased (+1) starting with the last digit of the seconds display using the arrow key. The number can be decreased (-1) starting with the last digit of the seconds display using the arrow key. The number is stored using the button.
Page 5 2. Service level The desired language can be selected using the arrow keys . The selection is confirmed using the button. The screen then switches back to the “Languages” display. The menu navigation is immedi- ately displayed in the selected language. Programmed languages are: German, English, French, Italian, Norwegian, Polish, Swedish, Spanish, Slovenian, Romanian, Czech.
Page 6 3. Table values 3. Table values 6 / 8...
Page 7 4. Compressor data sheet 4. Compressor data sheet 7 / 8...