Setup The Fr-E800-Scepa - Mitsubishi Electric FR-E800-SCEPA Quick Start Manual

Mitsubishi Electric Automation, Inc.
500 Corporate Woods Parkway, Vernon Hills, IL 60061 • phone: 847.478.2100
An ISO9001 Certified Company

4. Setup the FR-E800-SCEPA

a. Change IP Address of the E800 (default : 192.168.1.50)
i. Pr. 1434:
ii. Pr. 1435:
iii. Pr. 1436:
iv. Pr. 1437:
Method 1: Manually set with PU Unit (built-in)
i.
ii.
iii.
iv.
v.
vi.
17 | P a g e
192 (DEFAULT)
168 (DEFAULT)
3
5
Press [PU/EXT] and make sure you are in [PU Mode]
Press [MODE] until you see [P.0]
Press Arrows Up/Down until you reach IP Address Parameters (Pr. 1434-37)
Press [SET]
Modify to desired value (i.e. PR. 1436 should show [3])
Press [SET] again
R - 2 1 2 - S S G T S G - 0 1 0 - A