Mitsubishi Electric FR-E800-SCEPA Quick Start Manual page 6

Mitsubishi Electric Automation, Inc.
500 Corporate Woods Parkway, Vernon Hills, IL 60061 • phone: 847.478.2100
An ISO9001 Certified Company
b. IP/MAC address
The IP Address is required for initial connection and communicate on to the modules.
UDP (IP Address) is used to establish comms
Then cyclic data (IE TSN 0x890f) occurs layer 2
IP Address is also used for Slave status back to Master (using SNMP protocol)
Network Station Number
Mitsubishi Networks (IE Field / IE Control / Ethernet)
6 | P a g e
AND Network/Station # required:
(MAC
is used for PLC Programming – AND Routing (Transient Messaging) to other
R - 2 1 2 - S S G T S G - 0 1 0 - A
Why??...
Address)