Placa Usb - Alienware m15 R7 AMD Service Manual

Steps
1. Connect the ethernet and audio board to the system board.
2. Align the screw holes on the ethernet and audio board to the screw holes on the system-board assembly.
3. Replace the two screws (M2x4) that secure the ethernet and audio board to the system-board assembly.
4. Turn the system-board assembly over.
Next steps
1. Follow the procedure from step 6 to step 25 in installing the
board (NVIDIA GeForce 3050
2. Install the battery.
3. Install the rear-I/O cover.
4. Install the wireless card.
5. Install the 2230 solid-state drive
6. Install the 2230 solid-state drive
7. Install the base cover.
8. Follow the procedure in

Placa USB

Removing the USB board
Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the 2230 solid-state drive
4. Remove the 2230 solid state drive
5. Remove the wireless card.
6. Remove the rear-I/O
7. Remove the battery.
8. Follow the procedure from step 1 to step 21 in removing the
board (NVIDIA GeForce 3050
Ti), whichever applicable.
or 2280 solid-state drive
or 2280 solid-state drive
After working inside your
Before working inside your
or 2280 solid-state drive
or 2280 solid-state drive
cover.
Ti), whichever applicable.
system board (NVIDIA GeForce 3060/3070 Ti/3080 Ti)
in slot one, whichever applicable.
in slot two, whichever applicable.
computer.
computer.
in slot one, whichever applicable.
in slot two, whichever applicable.
system board (NVIDIA GeForce 3060/3070 Ti/3080 Ti)
or system
or system
63