Adding A Printer; Usb Printer; Install Instructions; Parallel Printer - Alienware Aurora mALX User Manual

Adding a Printer

The most commonly used peripheral is a printer. The following conventions will help
you to add a printer, however it is always best to refer to the printer manual for specific
instructions and configuration options.

USB Printer

Most new printers have a USB interface connection. You may use any one of the ports
to connect the printer.

Install Instructions:

1. Set up the printer according to its instructions (unpacking, paper tray,
toner/ink car¬tridge etc.).
2. Turn ON the computer.
3. Turn ON the printer.
4. Connect the printer's USB cable to one of the USB ports on the computer.
5. Windows will identify the printer and either load one of its own drivers or
ask you to supply one. Follow the on-screen instructions.

Parallel Printer

This is still a very common type of printer. The install instructions are below (you will
need to purchase a parallel to USB converter).
After setting up the printer attach the parallel cable to the printer.
Connect the printer's parallel cable to the Parallel to USB converter, and then plug the
converter into the USB port.
Turn on the printer, then turn on the computer.
Windows will identify the printer and either load one of its own drivers or ask you to
supply one. Follow the on-screen instructions.
Alienware Aurora mALX Technical Reference