Yamaha 6X9 DIGITAL ELECTRONIC CONTROL Operation Manual page 82

Selection of automatic deceleration distance
The deceleration distance setting allows you to select from three ranges of deceleration starting dis-
tance. When approaching the final destination, deceleration starts at different timings depending on
the selected setting.
Menu > Boat Set > Autopilot Setting > Deceleration Setting
-Very short
-Short
-Normal
TIP:
The default is set to Normal.
If you select Very Short/Short, you may not be able to stop at the final destination.
TIP:
• You cannot set the deceleration distance setting when Final Track Point Mode is set to None (Non-
Stop).
• Set it before turning on the track point mode.
• The Deceleration Setting cannot be changed when you are approaching the final destination.
Final destination
Very
short
Short
Normal
77
TRACK POINT