Engine Shut-Off Switch; Smart Key Settings; Password Card - Yamaha 6X9 DIGITAL ELECTRONIC CONTROL Operation Manual

Engine shut-off switch

The clip must be attached to the engine shut-
off switch for the engines to run. The cord
should be attached to a secure place on the
operator's clothing, or arm or leg. Should the
operator fall overboard or leave the helm, the
cord will pull out the clip, turning all engines
OFF. This will prevent the boat from running
away under power.
Attach the engine shut-off cord to a
secure place on your clothing, or your
arm or leg while operating. Do not attach
the cord to clothing that could tear loose.
Do not route the cord where it could
become entangled, preventing it from
functioning. Avoid accidentally pulling the
cord during normal operation. Loss of
engine power means the loss of most
steering control. Also, without engine
power, the boat could slow rapidly. This
could cause people and objects in the
boat to be thrown forward.
1. Engine shut-off switch
2. Clip
3. Engine shut-off cord (lanyard)

Smart key settings

Password card

The key fob is provided with two cards on
which are written its factory default. Keep
these cards in safe places, because you will
need one of them to start the engine if the
key fob is lost or malfunctions, or its battery
fails.
TIP:
If you change the password, the factory
default that is provided is disabled.
1. Factory default
1
2
3
12
Engine shut-off switch
1