Displayed when deceleration during TRACK POINT has finished. (When boat does SetPoint control
at final destination)
Deceleration finished.
To activate Set Point, shift all levers to neutral.
Displayed when TRACK POINT was turned on after setting route on MFD with no final destination
information.
When Final Track Point is reached, deceleration
mode is engaged. If necessary, operate control
lever before Final Track Point.
Displayed if GPS signal is unstable. If this situation continues, the Autopilot function will be can-
celled and boat speed will be reduced.
GPS is unstable.
Boat control may be deactivated soon.
Speed Control: Move remote control lever.
Autopilot: Turn steering wheel.
5
Confirm
Confirm
Confirm