Ethernet Interfaces X7E1, X7E2 And Xeth1; Dc Voltage Supply X1S - Bosch REXROTH IndraLogic VEP 5 Series Operating Instructions Manual

Embedded terminals with profibus dp master
Table of Contents

Advertisement

Bosch Rexroth AG
Interfaces
Not all USB devices are detected.
The operating system does not support all USB devices. Devices that
require a special USB driver, which is not integrated in the system,
cannot be operated at the USB interfaces.

9.4 Ethernet interfaces X7E1, X7E2 and XETH1

Plug type
Cable length
Number
Maximum data transfer rate
Plug name
Tab. 9-2: Ethernet network interface
Ethernet interface — Status and diagnostic displays
LED Link
On: Connection to network available
Off: No connection
Flashing: Communication is running
LED Status
On: Communication is running
Off: No communication
LED Speed
Off: 10 MB
Green: 100 MB
Yellow: 1 GB
9.5 24 V DC voltage supply X1S
Cables up to a max. conductor cross-section of 1.5 mm
the connection terminal (pin strip SL grid 3.5 mm).
Fig. 9-3: 5-pin connection terminal for VEP xx.5 devices
14/41
Embedded Terminals with Profibus DP
Basic
RJ45, socket, 8-pin
100 m max.
1
10/100 MBit and 1 GBit
XETH1
X1S
1 2 3
4
Advanced
RJ45, socket, 8-pin
100 m max.
2
10/100 MBit and 1 GBit
X7E1, X7E2
2
can be connected to
5
DOK-CONTRL -VEP*XX.5***-IT01-EN-P
Master

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rexroth indralogic vep 30.5

Table of Contents