Grizzly H0584 Instruction Sheet

EYE INJURY HAZARD!
Always wear safety glasses
when using this tool to
prevent serious personal
injury.
Always wear respirator when
Always disconnect tool from
air to prevent unexpected
operation during service.
DO NOT EXCEED 120 PSI!
Personal
occur.
Product Information
• 6,000 RPM
• Requires 90 PSI
• Requires 12 CFM
• Requires 5" hook and loop sanding disc
• / " NPT air inlet
1
4
• Weighs 4 lbs.
Inventory
A. Air Sander ....................................................1
B. Plastic Hose .................................................1
C. Dust Collection Bag ......................................1
D. Wrench .........................................................1
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
DUST HAZARD!
using this tool.
INJURY HAZARD!
injury could
COPYRIGHT © JUNE, 2006 BY GRIZZLY INDUSTRIAL, INC.
#BL8321 PRINTED IN TAIWAN
MODEL H0584
DUAL ACTION SANDER
INSTRUCTION SHEET
A
B
Figure 1 Model H0584 inventory.
.
Assembly
To assemble the Model H0584:
1.
Install a ⁄ " NPT male quick-connect fitting
1
4
(not included) into the sander hose.
2. Attach a 5" hook and loop sanding disc to the
sanding pad as shown in Figure 2.
Figure 2. Attaching sanding disc.
D
C