Abnormality - Panasonic K-NL304K User Manual

4.10.4 Abnormality

There are two types: HDD/Network.
HDD: HDD error, no HDD, no space. See Figure 4-85 and Figure 4-86.

Network: Disconnection, IP conflict, MAC conflict. See Figure 4-87.

Alarm Out: Please select alarm activation output port (multiple choices).

Less than: System can alarm you when the HDD space is less than the threshold you set here

(For HDD no space type only).
Latch: Here you can set corresponding delaying time. The value ranges from 1s-300s. System

automatically delays specified seconds in turning off alarm and activated output after external alarm
cancelled.
Show Message: system can pop up the message in the local screen to alert you when alarm

occurs.
Alarm Upload: System can upload the alarm signal to the network (including alarm centre) if you

enabled current function. For disconnection event, IP conflict event and MAC conflict event, this
function is null.
Send Email: System can send out email to alert you when alarm occurs.

Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.

Figure 4-85
89