Ip Filter - Panasonic K-NL304K User Manual

4.11.1.5 IP Filter

IP filter interface is shown as in Figure 4-94. You can add IP in the following list. The list supports max 64
IP addresses. System supports valid address of IPv4 and IPv6. Please note system needs to check
the validity of all IPv6 addresses and implement optimization.
After you enabled trusted sites function, only the IP listed below can access current NVR.
If you enable blocked sites function, the following listed IP addresses cannot access current NVR.
Enable: Highlight the box here, you can check the trusted site function and blocked sites function.

You cannot see these two modes if the Enable box is grey.
Type: You can select trusted site and blacklist from the dropdown list. You can view the IP address

on the following column.
Figure 4-92
Figure 4-93
96