Ptz Function Setup - Panasonic K-NL304K User Manual

Please note the above interface may vary due to different protocols. The button is grey and cannot be
selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 4-29.
Icon

4.6.2.1 PTZ Function Setup

Click , you can go to the following interface to set preset, tour, pattern, and scan. See Figure 4-32.
Preset Setup
In Figure 4-32, click Preset tab and use eight direction arrows to adjust camera to the proper position.
The interface is shown as in Figure 4-33.
Click Set button and then input preset number.
Click Set button to save current preset.
Function Icon
Preset
Tour
Pattern
Autoscan
AutoPan
Figure 4-32
Function
Flip
Reset
Aux Config
Aux on-off button
Enter menu
45