Download
Share
Print this page
Lamona NBT625/2NX Instruction Manual
  1. Manuals
  2. Brands
  3. Lamona Manuals
  4. Ventilation Hood
  5. NBT625/2NX
  6. Instruction manual
Lamona NBT625/2NX Instruction Manual

Lamona NBT625/2NX Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
NBT625/2NX
Cooker Hood
Instruction Manual
1

Advertisement

loading

Related Manuals for Lamona NBT625/2NX

Summary of Contents for Lamona NBT625/2NX

  • Page 1 NBT625/2NX Cooker Hood Instruction Manual...

  • Page 2: Table Of Contents

    Content 1…………………………………..………………………………Safety instructions 2…………………………………..………………………………Installation 3…………………………………..………………………………Start using your cooker hood 4…………………………………..………………………………Troubleshooting 5…………………………………..………………………………Maintenance and cleaning 6…………………………………..………………………………Environment protection...

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS his manual explains the proper installation and use of your cooker hood, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference. Never to do: Always to do: ●...
  • Page 4 Always to do: Always to do: ● ● lways put lids on pots and pans aution: The appliance and its when cooking on a gas cooker. accessible parts can become hot during operation. Be careful to avoid ● hen in extraction mode, air in the touching the heating elements.
  • Page 5 INSTALLATION (VENT OUTSIDE) MOUNTING OF THE V-FLAP（Optional） If the cooker hood does not have an assembled V-flap 1, you should mount the half- parts to its body. The images only show an example of how to mount the V-flap,the outlet may be various according to different models and configuration. To mount the V-flap 1 you should: •...
  • Page 6 3. The cooker hood is wall mounted by 4 screws (4mm x 30mm) and wall plugs. Mount the cooker hood on the wall on the back of the cooker hood by 2 screws (4mm x 30mm) and wall plugs. Then fix the cooker hood on the wall by 2 screws (4mm x 30mm) and wall plugs through the small L-shaped bracket.

  • Page 8: Start Using Your Cooker Hood

    If there is gap between the wall and the cooker hood, you may install the L-shaped bracket on the bottom of the hood by two screws (3 x 12mm). The installation of the L-shaped bracket is optional. Note: The expansion pipe is not included in the product. ...

  • Page 9: Troubleshooting

    4. The power will be connected when pull out the front panel. Conversely, the power will be automatically disconnected. TROUBLESHOOTING Fault Possible Cause Solution Fan switch turned off Select a fan switch position. Light on, but motor Fan switch failed Contact service center.
  • Page 10 GENERAL Cleaning and maintenance should be carried out with the appliance cold especially when cleaning.Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on the surfaces. STAINLESS STEEL The stainless steel must be cleaned regularly (e.g.weekly) to ensure long life expectancy.Dry with a clean soft cloth.
  • Page 11 CARBON FILTER Activated carbon filter can be used to trap odors. Normally the activated carbon filter should be changed at three or six months according to your cooking habit. The installation procedure of activated carbon filter is as below. (1) Slide the front part of the cooker hood. (2) The al filter should be detached first.

  • Page 12: Environment Protection

    ENVIRONMENTAL PROTECTION: This product is marked with the symbol on the selective sorting of waste electronic equipment. This means that this product must not be disposed of with household waste but must be supported by a system of selective collection in accordance with Directive 2012/19/EU.