Visca Camera-Issued Messages - Datavideo PTC-150TW Instruction Manual

Address Set
IF_Clear
(Broadcast)
IF_Clear (For x)
*When the address-switch is fixed at 0, the value x in 88 30 0x FF will be indeterminate.
Do not transmit the command (except Address Set, IF_Clear, CAM_POWER), when menu panel
shows on the screen. In that case, clear the menu panel first using CAM_Menu Command, and
then proceed.

9.2.5 VISCA Camera-Issued Messages

9.2.5.1 ACK/Completion Messages
Command
ACK
Completion
z = Device address + 8
9.2.5.2 Error Messages
Command
Syntax Error
Command Buffer Full
No Socket
Command Not
Executable
81 09 05 38 FF
(Example)
88 30 01 FF
88 01 00 01 FF
8x 01 00 01 FF
Command Message
z0 4y FF
(y: Socket No.)
z0 5y FF
(y: Socket No.)
Command Messages
z0 60 02 FF
z0 60 03 FF
z0 6y 05 FF
(y: Socket No.)
z0 6y 41 FF
(y: Socket No.)
90 60 02 FF
(Syntax Error)
88 30 02 FF
88 01 00 01 FF
z0 50 FF (Completion)
Returned when the command is
accepted
Returned when the command has been
executed
Returned when the command format is
different or when a command with illegal
command parameters is accepted.
Indicates that two sockets are already
being used (executing two commands)
and the command could not be accepted
when received.
Returned when no command is executed
in a socket specified by the cancel
command, or when an invalid socket
number is specified.
Returned when a command cannot be
executed due to current conditions. For
example, when commands controlling
the focus manually are received during
auto focus.
46
Accepted an incompatible
command.
Returned the device
address to +1.*
Returned the same
command.
ACK is not returned for
this command.
Comments
Comments