Water Hardness - Hanseatic HG4585C10J7610DS User Manual

2. Loosen both screws on the reverse side
of the covering panel and remove them.
(c)
3. Affix the condensation protection film
supplied (c) to the underside of the work-
top. In this way, you will avoid damage to
the work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
4. Place the dishwasher in the desired
position.
5. In order to equalise unevenness in the
floor and set up the dishwasher on a level
horizontal base, you can screw the four
appliance feet (26) in or out. There are
slots in the appliance feet around the cir-
cumference. Insert a screwdriver and turn
the appliance foot.
Use a spirit level to set up the dishwasher.
Installation, substructure, connection and initial use
(26)

Water hardness

Determine water hardness
In order to determine the water hardness in
your place of residence, you can
– look on the website of your water provider.
– telephone your water supplier.
– purchase suitable test strips at the
pharmacy.
Water hardness in
your household in
°dH
0-5
6-11
12-17
18-22
23-34
35-55
1. Obtain the appropriate setting from the
table above.
2. Close the dishwasher door.
(1)
(8)
3. If the dishwasher is switched on, switch it
off with the button (1).
Page EN-31
Water hardness in
the dishwasher
H1
H2
H3
H4
H5
H6
(6)