olympia electronics BSR-8019 Quick Start Manual

BSR-8019
Addressable input unit with auxiliary relay
Technical Specifications
Main voltage
Quiescent current
Consumption with activation input
Consumption with activation relay
Degrees of cover protection
Produced in accordance with
Operation temperature
Humidity
Dimensions
Weight
Guarantee
Description
We use the addressable input unit with auxilary relay for connecting to the loop gas
detectors (BS-675 and BS-676).
The device has a controlled input, monitored for short circuits and open circuits. Also
the device has a relay (1A/30V) that is activated for 5 seconds after the reset of the
panel.
The panel references the input unit with the name ´´INPUT ×××" (××× is the setting
address of the device).
A red coloured LED that blinks periodically in standby mode, is a power indication LED
and indicator for the good operation of the device.
When a device issues an alarm the LED lights. When we sillence the sirens, the LED
remains lit to show us the device that issued the alarm. The LED goes off when we
RESET the panel.
Each device has an address with which it is recognized from the panel. It's forbidden for
two devices with same addresses to be connect to the same loop. The back page
contains all the available address settings which are done using the dipswitch.
On each panel we can connect up to 127 input devices with auxilary relay.
26 / 09 / 2003
14-30 V
1 mÁ
1.5 mA (with the LED lit)
6 mA (with the LED lit)
IP 20
EN 54
o
-20 60 C
to
Up to 95% relative humidity
113 x 70 x 48 mm
200 gr
2 years
1801900-009-001
Address setting dipswitches (1-6).
Operation mode setting dipswitch (7).
Indicator LED.
It blinks periodically in standby mode.
The LED lights when the device issues an alarm.
The LED goes off when we reset the panel.
Input connection terminal block.
The input is controlled and
has one terminal resistor (56Ê)
Connection terminal block of output relay
(NO, NC, C)
Connection terminal block with the loop.
Loop
BSR-8018
+L -L +L -L
NO NC C IN- IN+
26 / 09 / 2003
BSR-8019
+L -L +L -L
NO NC C IN- IN+
Loop Loop
BSR-8019
+L -L +L -L
NO NC C IN- IN+
Loop
1801900-009-001