Installing The Driver - Hamamatsu Photonics C9266-03 Instruction Manual

2.3 Installing the driver

Follow these steps to install/upgrade the driver.
Please note that in the following installation method the PC is to be switched on before:
i) Connecting the module or the Camera module to the USB connector of the PC, and
ii) Connecting the module or the Camera module to an external power source (if any).
2.3.1 Compliant operating systems
This driver is compliant with the following operating systems.
i) Microsoft Windows 2000 (Service Pack 4 or higher)
ii) Microsoft Windows XP (Service Pack 1 or higher)
2.3.2 Driver software
The CD-ROM provided contains the following driver software.
i) UsbCamIF.sys
ii) UsbCamIF.inf
CCD Data Acquisition Module C9266-03/C9266-04
5