Setup; Parts Description - Hamamatsu Photonics C9266-03 Instruction Manual

2. Setup

2.1 Parts description

C9266-03/C9266-04 Front Panel
C9266-03 Rear Panel
(2)
C9266-04 Rear Panel
(2)
(1) CCD connector
This is a high-density 35-pin MDR connector for the Hamamatsu CCD area image sensor
(S10810, S10811). A bias voltage and clock signal are fed to the CCD through this
connector. Analog video signals from the CCD proportional to X-ray intensity levels and
synchronized timing signals (H-CMOS logic level signals) are input to this connector.
(2) USB connector
This is an industrial standard USB connector for connecting to a PC. This connector
interface conforms to USB 2.0. Various C9266-03/C9266-04 settings can be made from
the PC through this interface. X-ray image data converted to digital signals are sent to the
PC.
CCD Data Acquisition Module C9266-03/C9266-04
(3)
(3)
(1)
(4)
(5)
2
(6)