Hamamatsu Photonics C9266-03 Instruction Manual page 2

CCD Data Acquisition Module C9266-03/C9266-04
1) Avoid using or storing this product in the following locations:
a) where ambient temperature drops below 0°C or rises above 50°C
b) subject to large changes in temperature
c) exposed to direct sunlight or near heaters
d) where humidity exceeds 70% or product is exposed to moisture
e) near strong magnetic sources or radio frequency generators
f) subject to vibration
g) where corrosive gases are present (such as chlorine or fluorine)
h) exposed to excessive dust
2) This product is a high precision device. Handle it with extreme care.
a) Do not disassemble or modify any part of this product. Malfunctions might otherwise
occur.
b) Be careful not to drop, bump or apply excessive impacts to this product. Drop impacts
or bumps may damage the product.
c) Never connect or disconnect the cables while the power is supplied to this product.
The internal circuits might otherwise be damaged.
d) Securely connect this product to the power supply with the correct polarity and voltage.
Wrong connections may damage the internal circuit or sensor when power is turned
on.
e) Make sure that the product is used within the maximum ratings.
f) When connecting to other devices, be sure to observe the electrical potential such as
ground potential.
3) To extract the fullest performance from this product, follow the instructions below.
a) Use a power supply with minimum ripple and noise.
Handling Precautions