2.3.4 Installing the driver (for Windows XP)
1. Connect the USB camera module to the PC with the USB cable.
2. Switch on the PC. (When the USB camera module is connected to an external power
source, switch it on after the PC has been turned on.)
3. Check that "HAMAMATSU xxxxx" or "HPK xxxxx"(xxxxx : Product number) is displayed in
the following window, click the "Install from a list or specific location [Advanced]" radio
button to select it and click the "Next >" button.
CCD Data Acquisition Module C9266-03/C9266-04
Check
10
Click