1. UNIT DESCRIPTION
1.1 COMPONENTS IDENTIFICATION
4
6
5
6
2
1
7
3
(1). Output Panel: Location of mobile power controls and output
receptacles.
(2). Charging Input Panel: Location of mobile power charging input
receptacles.
(3). Maintenance Cover: Remove the cover to install or replace battery
in the mobile power.
(4). Carrying Handle: Lift the generator by this handle.
(5). Draw Bar Handle: Pull the handle to wheel this mobile power
around.
(6). Front Handle / Rear Handle: Two persons can carry the mobile
power easily by these two handles.
(7). Connector Cover: Open the cover to connect the Battery
‐ 3 ‐