Longitudinal Power Feed System
Figure 24
Figure 24.
A. Limit Switch:
B. Limit Stop:
C. Rapid Movement Button:
D. Direction Lever:
E. Speed Dial:
F.
ON/OFF Switch:
G. Power Lamp:
ON
H. Ball Handle:
I.
Graduated Dial:
Disengage the longitudinal ball handles
before turning the power feed ON to avoid
entanglement and personal injury.
Tools Needed
To operate the longitudinal power feed:
1.
2.
Figure 25.
3.
4.
Be sure there is enough running clearance
between the table, spindle, vise/clamps, or
jigs before turning the power feed ON. Be
aware that all of these objects represent
potential pinch points.
Qty
Figure 25