Safety Information - Elatec TWN4 MULTITECH NANO LEGIC 42 M Integration Manual

Hide thumbs Also See for TWN4 MULTITECH NANO LEGIC 42 M:

Table of Contents

2 SAFETY INFORMATION

•

ELATEC TWN4 MultiTech Nano LEGIC 42 M is an electronic component and should be installed exclusively by a trained and

qualified personnel.

•

ELATEC recommends the integrators to follow general ESD protective measures during the installation of TWN4 MultiTech

Nano LEGIC 42 M into a host device, e.g. the use of an antistatic wristband or special gloves.

•

The integrator should not touch the antennas (if not shielded), printed circuit boards, connectors or other sensitive components on

TWN4 MultiTech Nano LEGIC 42 M.

•

Metallic materials on or in direct vicinity to the product might reduce the reading performance of the product. Refer to the installation

instructions for more information.

•

Before installing TWN4 MultiTech Nano LEGIC 42 M into a host device, the integrator should also make sure that he/she has read

and understood the ELATEC technical documentation related to TWN4 MultiTech Nano LEGIC 42 M, as well as the technical

documentation related to the host device. In particular, the instructions and safety information given in the user manual of TWN4

MultiTech Nano LEGIC 42 M should be read carefully and listed in the technical documentation of the host manufacturer as well,

as soon as these instructions and safety information are required for a safe and proper use of the host device containing TWN4

MultiTech Nano LEGIC 42 M.

•

Any failure to comply with the safety information given in this document and in the user manual, is considered improper use.

ELATEC excludes any liability in case of improper use or faulty product installation.

Page 4 of 11

Table of Contents

Do you have a question about the TWN4 MULTITECH NANO LEGIC 42 M and is the answer not in the manual?