Introduction; About This Manual; About Twn4 Multitech Nano Legic 42 M; Elatec Support - Elatec TWN4 MULTITECH NANO LEGIC 42 M Integration Manual

1 INTRODUCTION

1.1

ABOUT THIS MANUAL

This integration manual explains how to integrate ELATEC RFID reader/writer module TWN4 MultiTech Nano LEGIC 42 M into a host
device and is mainly intended for integrators and host manufacturers. Before installing the product, the integrators should read and
understand the content of this integration manual and other relevant installation documents.
The content of this integration manual is subject to changes without prior notice and printed versions might be obsolete. Integrators
and host manufacturers are required to use the latest version of this integration manual.
For the sake of better understanding and readability, this manual might contain exemplary pictures, drawings and other illustrations.
Depending on your product configuration, these pictures might differ from the actual design of your product.
The original version of this integration manual has been written in English. Wherever the integration manual is available in another
language, it is considered as a translation of the original document for information purposes only. In case of discrepancy, the original
version in English will prevail.
1.2

ABOUT TWN4 MULTITECH NANO LEGIC 42 M

TWN4 MultiTech Nano LEGIC 42 M is designed for integration into machines or other devices. It can be connected to an external
antenna through a printed circuit board (125 kHz, 13.56 MHz or both).
1.3

ELATEC SUPPORT

In case of any technical questions, refer to the ELATEC website (www.elatec.com) or contact ELATEC technical support at:
support-rfid@elatec.com
1.4

REVISION HISTORY

VERSION
01 First edition
© 2022 ELATEC GmbH – TWN4 MultiTech Nano LEGIC 42 M integration manual DocRev1 – 04/2022
CHANGE DESCRIPTION EDITION
04/2022
Page 3 of 11