Page 5
Wiring diagrams CIR Internal CIR 105-120 CIR 105-120 230V~ 230V~ CIRT 1 2 3 1 2 3 L N 1 2 Output control with timer 230V~ Max load 3500W CIR 105-120 CIR 105-120 CIR 110-120 CIR 110-120 400V2~ 230V~ 230V~...
Page 6
The CIR must be preceded by A rule of thumb for infrared heaters an all-pole switch. CIR must not be placed equipped with metal tubular elements is that directly under a wall-outlet! A terminal block, 750–1000 W/m² increases the experienced which enables connection to other heaters is temperature by about 10 °C.
Page 7
Maintenance Safety The heater is on the whole made of rustproof • The unit must not be fully or partially material and usually does not require any covered as overheating can result in a fire maintenance. Pollution can in the long run risk! dull the reflectors somewhat.
Page 8
Main offi ce Frico AB Tel: +46 31 336 86 00 Industrivägen 41 SE-433 61 Sävedalen mailbox@frico.se Sweden www.frico.net For latest updated information and information about your local contact: www.frico.net.