After The Installation - Canon Super G3 FAX board-AL1 Service Manual

15) Install the Rear Upper Cover. (7 Screws)
NOTE:
Be sure to install the 3 Binding screws show in the figure below.
x3
6
Installation > After the Installation Installation
F-6-20
6 Installation > After the Installation Installation

After the Installation

1) Affix the appropriate Modular Label over the existing label.
2) Connect the PTT Plug matched the field or area to the PTT Cable (6 contact type).
NOTE:
This procedure is for Europe.
Do not connect the Telephone Cord (2 contact type) with the PTT Plug.
6-8
F-6-21
F-6-22
6-8