Setting Of Numeric Parameter (Numeric Param.) - Canon Super G3 FAX board-AL1 Service Manual

5
Service Mode Service Mode > Setting of Printer Functions (PRINTER) > Setting of Numeric Parameter (NUMERIC Param.) > Numerical Parameter Composition

Setting of Numeric Parameter (NUMERIC Param.)

Sssw Menu Num Ncu Type
<NUM> <1/4>
001 xxxxx
xxxxx
002
xxxxx
003
004 xxxxx
xxxxx
005
006 xxxxx
007 xxxxx
008 xxxxx
■ Numerical Parameter Composition
No. Function
01 Missing areas of printing image when receiving
image with longer length than standard
04 Leading edge blank area
05 Trailing edge blank area
<001: printing upon reception of extra-length image>
Use it to set the range of the image to be removed from when printing an extra-length
received image.
Lower the parameter to decrease the range if the trailing edge of the received image must be
retained (as when it is longer than the effective recording length).
<004: leading edge margin>
Use it to set the leading-edge margin for the effective recording length.
<005: trailing edge margin>
Use it to set the trailing-edge margin for the effective recording length.
5 Service Mode > Setting of Printer Functions (PRINTER) > Setting of Numeric Parameter (NUMERIC Param.) > Numerical Parameter Composition Service Mode
ISDN Print Clear Test Report
<READY>
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
←（yyyyy）{aaaaa～bbbbb}
OK
F-5-13
Setting range Initial setting Unit
0 to 9999 12 1 mm
0 to 9999 3 1 mm
0 to 9999 3 1 mm
T-5-23
5-18
5-18