Pro-Form POWER 795i User Manual page 12

10. Set the console assembly (G) on the Handrails
(84). Make sure that no wires are pinched.
Attach the console assembly (G) to the brack-
ets on the Handrails (84) with four 1/4" x 1/2"
Screws (4); do not tighten the Screws yet.
Pull the tie (N) tight against the Upright Wire (81)
and cut off the end of the tie. Insert the excess
Upright Wire into the Right Upright (90).
11. Attach the Pulse Crossbar (31) to the console
assembly (G) with six #8 x 5/8" Screws (1); start
all six Screws, and then tighten them. Do not
overtighten the Screws.
Firmly tighten the four 1/4" x 1/2" Screws (4).
10
G
84
N
81
4
90
11
G
4
1
12
84
4
4
31
1