Text Message Alarm Notifications; Troubleshooting - ICT Sine Wave ICT1500-12W Instruction Manual

TEXT MESSAGE ALARM NOTIFICATIONS

The inverter can send alarm notifications as text messages to a cell phone by
configuring the alarm e-mails to be sent to your mobile phone service provider.
On the E-mail Setup page of the web based utility enter the text address of your
phone in the Recipient E-mail Address field.
Example with an AT&T phone: enter the recipient address
cellnumber@txt.att.net, replacing cellnumber with your 10 digit cell phone
number.
Cell address formats for some common North American mobile phone providers:
AT&T
Verizon
Sprint
T-Mobile
Virgin Mobile
Nextel
Bell Mobility
Rogers
Telus
Virgin Mobile (Can)

TROUBLESHOOTING

I am unable to access the web-based configuration utility:

Check that you are using the correct IP address for the inverter by
running the IP Address Discovery Utility (available on the Tools
download section of the ICT Web page
http://www.ictcorporate.com/resources/tools/
connected inverter and see the assigned IP address. Run the utility on a
Windows computer connected to the same network as the inverter, and
it will report the IP addresses of all ICT units connected to that network.
The IP address may have been changed if DHCP is enabled.

Ensure you are using an industry standard "crossover" type of network
cable if directly connecting a computer to the inverter, and a "straight-
through" type of cable to connect the inverter to a network.

Ensure the network card settings on your computer are configured for
accessing the IP address of the inverter. To access a unit with the default
24 Innovative Circuit Technology Ltd.
All manuals and user guides at all-guides.com
cellnumber@txt.att.net
cellnumber@vtext.com
cellnumber@messaging.sprintpcs.com
cellnumber@tmomail.net
cellnumber@vmobl.com
cellnumber@messaging.nextel.com
cellnumber@txt.bell.ca
cellnumber@pcs.rogers.com
cellnumber@msg.telus.com
cellnumber@vmobile.ca
) to locate the