Table of Contents
Advertisement
MOBILE WEB APP
Use the mobile version of the Status and Control page to monitor and control
the inverter with a smartphone web browser.
Access the Mobile Web App by entering the address of the inverter in the
address field of your browser, followed by "/m". (e.g. https://192.168.0.180/m)
You will then be prompted for your user name and password, and logged into the
following Status and Control screen:
For improved security you should normally use a HTTPS (secures) connection
when accessing the inverter over the Internet with the Mobile Web App, or use a
Virtual Private Network (VPN) connection.
A shown above the Mobile Web App provides information on Battery Voltage,
Inverter Output Voltage, Inverter Output Power, Output Power Source (from
battery, or external AC source), and any alarms. Tap on the Inverter Enabled
button to toggle the inverter output power on or off.
PASSWORD and IP ADDRESS RESET
Reset the Administrator password, the IP address, and network settings to the
original factory default values by doing the following: (the standard User
password is not affected)
1. With unit powered on press and hold the recessed Comm Reset button
on the back panel for approximately 20 seconds, using a paper clip wire
or similar item to press the button.
2. Release the button
All manuals and user guides at all-guides.com
Mobile Web App
Innovative Circuit Technology Ltd.
21
Advertisement
Table of Contents
