Troubleshooting - Electrolux EKG911A3 User Manual

22 www.electrolux.com
6. Use a spatula made of wood or
plastic or equivalent to open the inner
door. Hold the outer door, and push
the inner door against the top edge of
the door. Lift the inner door.
3
7. Clean the oven door with water and
soap. Clean inner side of the door.
Dry the oven door carefully.
When the cleaning is completed, install
the glass panels and the oven door. To
install the oven door, do the above steps
in the opposite sequence.
4

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
2
2
4
6
5
5
12.4 Replacing the lamp
Put a cloth on the bottom of the interior
of the appliance. It prevents damage to
the lamp glass cover and the cavity.
WARNING!
Danger of electrocution!
Disconnect the fuse before
you replace the lamp.
The lamp and the lamp glass
cover can be hot.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box
or deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300
°C heat-resistant lamp.
4. Install the glass cover.