6
Set the left handrail assembly (C) on the floor in
the position shown. Attach the Push Bar Bottom
(109) with two 5/16" x 3/4" Patch Screws (108);
do not fully tighten the Patch Screws yet.
Attach the right handrail assembly (D) in the
same way.
7. Set the handrail assembly (E) on the floor in the
position shown. Attach the Push Bar Top (110)
with six #8 x 5/8" Machine Screws (106); start
all six Machine Screws, and then tighten
them. Do not overtighten the Machine Screws.
6
108
108
7
106
106
110
10
D
109
C
106
E