Charging The Battery - Shark IZ102ANZ Owner's Manual

Cordless vacuum with self-cleaning brushroll
Table of Contents

Advertisement

CHARGING THE BATTERY

USING THE LI-ION CHARGER
LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet.
OUT OF THE VACUUM
To remove the battery, squeeze the Battery
Release Button and slide backwards. Plug the
charger into the charging port on the battery.
sharkclean.com.au
IN HANDHELD VACUUM
Remove the handheld vacuum from the wand by
pressing the Wand Release Button and pulling
up. Plug the charger into the charging port on the
handheld vacuum.
OFF
Slide switch to the bottom to turn off power.
To begin vacuuming in Standard Mode, slide switch
to the desired setting.
CARPET SETTING
Carpet
The brushroll spins faster to pick up debris below
the surface of your carpets.
SETTINGS
HARD FLOOR SETTING
Hard Floor/Small Area Rugs
The brushroll spins slowly to clean bare floors and
small area rugs.
BOOST MODE
For an added boost in power, pull the Trigger
on the handheld vacuum. Release it to return to
normal power.
sharkclean.co.nz

Advertisement

Table of Contents
loading

Table of Contents