Advertisement
Follow these steps to connect to the meter via the IrDA port:
1. Connect the meter to the PC. EIG offers a USB to IrDA cable, which can be ordered from EIG's
website: https://www.electroind.com/products/usb-to-irda-adapter/.
2. Open CommunicatorPQA
3. Click Connect in the Icon
Bar.
4. You will see the Connect screen. Make sure
your settings match the ones shown on the right
(use pull-down menus).
5. Click Connect. The Device Status screen opens,
confirming the connection. Click OK to close the
Device Status screen.
6. Click the Profile icon in the Icon bar.
7.The Device Profile screen opens. For the 100S, the tabs on the top of the screen let you choose
setting screens. For the 200S, there is a Tree menu on the left side of the screen.
Shark® 100S Meter
Click a tab to access the setting screen.
Electro Industries/GaugeTech
Powered by Innovation™
TM
software (see page QS-1 for the download link).
™
Shark® 100S/200S Quickstart
Shark® 200S Meter
Click on a plus sign to see the
settings and click on a setting to
open that settings screen.
Doc
#
E145723
V.1.16
QS - 6
Advertisement
