Name Of Each Part - Panasonic AV-HS04M5 Operating Instructions Manual

Name of each part

DVI-I output connectors [DVI OUTPUTS]
When connected to the SLOT1 option output connector: OUTPUT3
When connected to the SLOT2 option output connector: OUTPUT5
Analog output connectors [ANALOG OUTPUTS]
When connected to the SLOT1 option output connector: OUTPUT4
When connected to the SLOT2 option output connector: OUTPUT6
Setting switches
<Setting switch table>
Switch No.
1 I/P conversion mode
2
3
4
5 Reserved
6
7
8
Use switches No. 2 to 8 at the "off" (factory setting) position.
Setting the I/P (interlace/progressive) conversion mode:
Set the priority mode when converting video signals to DVI signals.
When converting to DVI signals, the frame rate will change signifi cantly from 50 Hz to 60 Hz
with the 1080/50i, 720/50p and 576/50i system formats: This means that conversion may not be
performed smoothly for moving images.
DVI / ANALOG OUTPUTS
Y Pb Pr
Off
Moving image
priority
—
—
—
—
—
—
—
7 (E)
DVI-I
On
Still image priority
—
—
—
—
—
—
—
Factory setting
Off
Off
Off
Off
Off
Off
Off
Off