Vivotek Supreme FE9382-EHV-v2 User Manual page 433

© 2020 VIVOTEK INC. All Right Reserved
ERROR: The device does not exist or is busy
ERROR: Formatted successfully, but cannot create database
8.39
Methods
8.39.1 Get Stream URI
Note: This request requires Viewer access privileges.
Syntax:
For RTSP, the user needs to input the URL below into a RTSP compatible player.
rtsp://<servername>:<port>/media2/stream.sdp?profile=<streamprofile_i<0~(n-1)>_token>
"n" is the maximum stream profile number (capability_media_streamprofiles_num)

"streamprofile_i<x>_token" is the unique identifier for each profile, x is within

0~(capability_media_streamprofiles_num)-1.
port is the rtsp port.

Please refer to the streamprofile group for requesting the stream profile token value for each
profile.
Example:
Request the streaming of streamprofile_i0_token=profile200,
rtsp://192.168.1.1:554/media2/stream.sdp?profile=profile200
Note:
If the requested certain profile streamprofile_i<x>_occupied=0, which indicates stream profile <x>
has not been created, the above method for requesting RTSP streaming will fail.
SDP for always multicast
8.39.2 Get
(capability_media_streamprofiles_support = 1)
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>:<port>/media2/<streamprofile_i<0~(n-1)>_profilename>.sdp
"n" is the maximum stream profile number (capability_media_streamprofiles_num)

"streamprofile_i<x>_profilename" is a friendly name for certain profile, x is within

0~(capability_media_streamprofiles_num)-1.
for Accessing Streaming
(capability_media_streamprofiles_support = 1)
VIVOTEK
285
User's Manual - 433