Vivotek Supreme FE9382-EHV-v2 User Manual page 205

© 2020 VIVOTEK INC. All Right Reserved
NAME
7.8.1 Video Input Setting per Channel
Group: videoin_c<0~(n-1)> for n channel products, and m is stream number
n denotes the value of "capability_nvideoin", m denotes the value of "capability_nmediastream"
NAME VALUE
cmosfreq 50, 60
mode 0 ~
"capability_videoin_c<0~(
n-1)>_nmode"-1
whitebalance auto,
<product panorama,
dependent> manual,
rbgain,
widerange,
outdoor,
indoor,
sodiumauto,
etc
(Available values are listed
in
"capability_image_c<0~(n-
1)>_wbmode")
VALUE SECURITY
(get/set)
SECURITY(
get/set)
4/4
4/4
4/4
DESCRIPTION
Preview settings of video profile.
* Only available when
"capability_image_c<0~(n-1)>_exposu
re_mode" !=0
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
DESCRIPTION
CMOS frequency.
* Only available when "
capability_videoin_type " is 2
Indicate the video mode on use.
Modes of white balance.
"auto": Auto white balance
"panorama": indicates that camera
would try to balance the white
balance effect of every sensor.
"rbgain": Use rgain and bgain to set
white balance manually.
"manual": 2 cases:
a. if "rbgain" is not supported, this
means keep current white balance
status.
b. if "rbgain" is supported, "rgain"
and "bgain" are updated to the
current values which is got from
VIVOTEK
57
User's Manual - 205