VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
NAME
7.10.1 IR cut control setting per channel
Group: ircutcontrol_c<0~(n-1)> for n channel products
0)
n denotes the value of "capability_nvideoin"
NAME
mode
sir
<product dependent>
daymodebegintime
240 - User's Manual
VALUE
"capability_daynight_
c<0~(n-1)>_spectrum
_mode".
VALUE
auto,
day,
night,
di,
schedule...etc
* Available values
are listed in
"capability_daynig
ht_c<0~(n-1)>_mo
de"
<product
dependent>
<boolean>
00:00~23:59
SECURITY
DESCRIPTION
(get/set)
(httpversion) is equal or greater than
0312a.
* We do not support this parameter
when "capability_nvideoin > 1".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
(capability_daynight_c<0~(n-1)>_support >
SECURIT
DESCRIPTION
Y
(get/set)
6/6
Set IR cut control mode
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
6/6
Enable/disable Smart IR
* Only available when
"capability_daynight_c<0~"capability_
nvideoin"-1>_smartir" is 1
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
6/6
Day mode begin time
92