Vivotek Supreme FE9382-EHV-v2 User Manual page 379

© 2020 VIVOTEK INC. All Right Reserved
NAME
baudrate
databit
paritybit
stopbit
uartmode
7.45 Lens Configuration
Group: lens for n channel products
n denotes the value of "capability_nvideoin"
(capability_image_c<0~(n-1)>_lensconfiguration_support = 1)
VALUE SECURITY
(get/set)
2400,4800,9600,19 4/4
200,38400,57600,1
15200
5,6,7,8 4/4
none, 4/4
odd,
even
1,2 4/4
rs485 4/7
DESCRIPTION
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
Set baud rate of COM port.
Data bits in a character frame.
For error checking.
"1": One stop bit is transmitted to
indicate the end of a byte.
"2": Two stop bits are transmitted to
indicate the end of a byte.
If you want to transfer the stopbit for
150% of the normal time used to
transfer one bit, the
uart_i<0~(n-1)>_stopbit should be set
as 2 and the uart_i<0~(n-1)>_databit
set as 5 as well.
RS485 mode.
VIVOTEK
231
User's Manual - 379