Vivotek Supreme FE9382-EHV-v2 User Manual page 243

© 2020 VIVOTEK INC. All Right Reserved
spectrum_mode
7.11 Image Setting per Channel
Group: image_c<0~(n-1)> for n channel products and m profile
n denotes the value of "capability_nvideoin" and m denotes the value of
"capability_nvideoinprofile"
NAME VALUE
brightness -5~5,100
<Not
recommended to
use this>
visible, 6/6
ir,
irenhanced,
blueenhanced
<product
dependent>
* Available values
are listed in
"capability_daynig
ht_illuminators
_spectrum_mode"
.
SECURITY
(get/set)
4/4
ernal_support > 0" and
"do<2~(capability_ndo)>" are listed in
"capability_daynight_illuminators_ext
ernal_interface".
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
Set spectrum method .
* We support this parameter when
the version number (httpversion) is
equal or greater than 0312a.
* Only available when
"capability_daynight_illuminators_
spectrum _support > 0".
DESCRIPTION
-5: Darker <-> 5: Bright
100: Use "
image_c<n>_brightnesspercent"
* Only available when bit 0 of
"capability_image_c<0~(n-1)>_basicse
tting" is 1
* We replace "brightness" with
"brightnesspercent".
* This parameter will not be used
after the version number (httpversion)
is equal or greater than 0400a.
VIVOTEK
95
User's Manual - 243