Vivotek Supreme FE9382-EHV-v2 User Manual page 125

Network: This rule allows the user to assign a network address and corresponding subnet mask to the
Allow/Deny List. The routing prefix is written in CIDR (Classless Inter-Domain Routing) notation. For
example:
For example:
• 192.168.100.14/24 represents the IPv4 address 192.168.100.14 and its associated routing prefix
192.168.100.0, or equivalently, its subnet mask 255.255.255.0 has 24 leading 1-bits.
• The IPv4 block 192.168.100.0/22 represents the 1024 IPv4 addresses from 192.168.100.0 to
192.168.103.255.
If IPv6 filter is preferred, you will be prompted by the following window. Enter the IPv6 address and the
two-digit prefix length to specify the range of IP addresses in your configuration.
Range: This rule allows the user to assign a range of IP addresses to the Allow/Deny List.
Note: This rule is only applied to IPv4.
For example:
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator's
IP address in this field to make sure the Administrator can always connect to the device.
accesses from IP address 192.168.2.x will be bolcked.
VIVOTEK
User's Manual - 125