MICROWAVE HOOD COMBINATION SAFETY
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools Needed
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Measuring tape
■
Pencil
■
Masking tape or
■
thumbtacks
Scissors
■
No. 2 Phillips screwdriver
■
No. 3 Phillips screwdriver
■
for Z\v-20 x 3" bolts
Drill
■
C\zn" (5 mm), C\," (10 mm),
■ ■
B\," (16 mm) drill bits
C\v" (19 mm) hole saw
■ ■
2
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
Tools and Parts
Diagonal wire cutting pliers
■
Stud finder
■
M\zn" socket wrench
■ ■
(or box wrench) for Z\v" x 2"
lag screws
1½" (3.8 cm) diam. hole
■
drill bit for wood or metal
cabinet
Keyhole saw
■
Caulking gun and
■
weatherproof caulking
compound
Duct tape
■
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Parts Supplied
For information on reordering, see "Replacement Parts" section.
NOTE: The hardware items listed here are for wood studs.
For other types of wall structures, be sure to use appropriate
fasteners.
A
B
C
A.
-24 x 3" round-head bolts (2)
C\zn
B.
-20 x 3" flat-head bolts (2)
Z\v
C. Washers (2)
D.
" toggle nuts (2)
C\zn
E.
" x 2" lag screws (2)
Z\v
F. Sheet metal screws (2)
G. Power supply cord bushing (1)
H. Damper assembly (for wall or
roof venting)
NOTE: Depending on model, aluminum grease filter and charcoal
filter may be combined.
Materials Needed
Standard fittings for wall or roof venting. See "Venting Design
■
Specifications" section.
D
E
F
H
Not Shown:
Upper cabinet template
■
Mounting plate (attached to
■
back of microwave oven)
Cardboard template (part of
■
packaging)
Aluminum grease filters
■
Charcoal filters (Depending
■
on model, charcoal filters may
not be included. See User
Instructions.)
G