Door Stop Adjustment - Viking FBI7360 Installation Manual

Door Stop Adjustment

Your refrigerator is factory set at a 90
below with the long end of the door stop facing away from the door. To change to 105
stop on top of the door hinge. Remove the two screws and door stop. Rotate the door stop 180
the shorter end faces away from the door. Replace door stop and screws.
For additional information on the door stop adjustment, visit the product information tab for 7 Series Bottom
Mount Refrigerators online at vikingrange.com
Remove screws and
door stop
o degree opening. The 90 degree door stop opening is shown in the illustration
Long end of door stop
o
Rotate 180 degrees
19
o
door stop, locate the door
o degrees so that
Door Stop
Replace door stop and
screws