Double Line Pull - Quadratec Q11000s Operator's Manual

Double Line Pull:

A Double Line Pull is used when a
vehicle is thought to be "deep stuck"
in mud or on a very steep slope where
extra pulling force is required. Start
by feeding out enough winch line
rope to free the winch hook. Attach
the hook to your vehicle's frame/tow
hook and run the line through a
snatch block. Disengage the clutch
and, using the snatch block, pull out
enough line to reach your anchor
point. Secure to the anchor point with
a tree trunk protector or choker chain
with the use of a D-Ring. After
rigging, review steps 12 through 16
for proper winching technique.
Triple Line Pull:
You will need two Snatch Blocks, two
44
Running wire rope
through snatch block