Table of Contents
Advertisement
Anchoring to a Live Tree
Wrap the Tree Trunk protector as low as possible around a
large diameter tree. Hook the two looped ends into a heavy
duty D-Ring. Connect the D ring to the loop that holds the
winch hook and secure the screw in clevis pin. Do not over
tighten the clevis pin.
Anchoring to a dead tree, rock or stump
Use the same method as above with the tree trunk protec-
tor or a choker chain ensuring you have a secure attach-
ment and a strong anchor point. Pulling to a dead tree or
rock can be tricky as the root system of a dead tree may not
hold the pressure you are putting on it. The same may be
true for a rock that is not deep seated in the ground.
Warning: keep operator and bystanders clear of cable,
vehicle and fall line of rock tree or other anchor.
Anchoring to another vehicle
This is one of the most common off road anchoring points.
Attach to the anchor vehicle's frame mounted tow hook or
directly to the vehicle frame. Do not wrap the hook back
around the winch line. Make sure the vehicle you are an-
choring to is in neutral (not in park), has the wheels blocked
and the parking brake on. Warning: shock or snap loads
will over load cable, hook and winch mount. Do not use
vehicle power or movement to increase force during winch
operation.
Clutch Engaged
Step Six: Fully Engage
Winch Clutch
To lock the winch clutch,
proceed to turn the Clutch
handle to the handle posi-
tion marked "Engaged".
35
Advertisement
Table of Contents
