Table of Contents
Advertisement
*7
The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*8
To prevent other users from joining your conversations with outside callers, turn this feature
on.
*9
This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed. You can set
one of 3 different alarm options (once, daily, or
weekly) for each alarm time.
Important:
R Make sure the unit's date and time setting
is correct (page 12).
1
M
N#720
2
MbN: Select the desired alarm. a MOKN
3
MbN: Select the desired alarm option. a
MOKN
"Off"
Turns alarm off. Go to step 9.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
4
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
5
Set the desired time. a MOKN
TGE610HK(en_en)_0817_ver030.pdf 27
6
Enter a text memo (10 characters max.).
a MOKN
7
MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
8
MbN: Select the desired snooze setting.
a MOKN
9
MOKN a M
N
Note:
R Press M
N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or M
sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Do not disturb mode
Do not disturb mode allows you to select a
period of time during which the handset will
not ring for outside calls. This feature is useful
for time periods when you do not want to be
disturbed, for example, while sleeping. Using
the phonebook's category feature (page 20),
you can also select categories of callers
whose calls override do not disturb mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit's date and time setting
is correct (page 12).
R If you have set the alarm, the alarm sounds
even if do not disturb mode is turned on.
Programming
N to stop the
27
2018/08/24 8:12:10
Advertisement
Table of Contents
