Belt Packs; Simultaneously Under Party Mode - Datavideo ITC300HP2K Instruction Manual

How to Operate the Base Unit to Communicate
with up to 4 belt packs Simultaneously under
Party Mode
The ITC-300 can support the function that the base unit can communicate to up to 4
belt packs simultaneously under Party Mode. Please follow following steps for
operating the simultaneous communication for multiple belt packs under the Party
Mode.
1. Please make sure that the Party Mode is launched.
2. Please press the channel No. buttons which are selected for simultaneous multi-
channel communication. For example, if the base unit want to communicate to 4 belt
packs which are connected to channel 1, 4, 5 and 8 simultaneously, please press the
channel 1, 4, 5 and 8 buttons and then those selected 4 channels can hear the
communication between the base unit and other belt packs.
3. If the No. 1, No. 4, No. 5 and No. 8 belt packs want to communicate to the base unit
simultaneously, users of the No.1, No.4, No.5 and No.8 belt packs must press the "TALK"
button simultaneously and then the No. 1, No. 4, No. 5 and No. 8 belt packs
can communicate to the base unit simultaneously.
Note: Please pay attention that although the ITC-300 base unit supports the
communication to up to 4 belt packs simultaneously under the Party Mode, however, if
users select more than 4 channel buttons which are located on the front panel of the
ITC-300 base unit, for example, if users select No. 1, No. 2, No. 3, No. 5 and No. 8
buttons, only the first 4 belt packs which press the "TALK" button can communicate
to the ITC-300 base unit simultaneously. According to above-mentioned example, if
the No. 1, 2, 3, 5 are the first 4 belt packs which press the "TALK" button, only the No.
1, 2, 3, 5 belt packs can communicate to the ITC-300 base unit simultaneously. If the
fifth belt pack press the "TALK" button, it still can not communicate to the base unit
(the button is shown in green). Only when one of the No.1, 2, 3, 5 belt packs releases
the "TALK" button, and then the No. 8 belt pack can be one of the members for the
Party Mode communication. At this time, the No. 1, 3, 5 and 8 belt packs are new
members for communicating with the base unit simultaneously.
23