Download
Share
Print this page
Hanwha Techwin Wisenet HCV-6080 User Manual
  1. Manuals
  2. Brands
  3. Hanwha Techwin Manuals
  4. Security Camera
  5. Wisenet HCV-6080
  6. User manual

Hanwha Techwin Wisenet HCV-6080 User Manual

High resolution camera
Hide thumbs

Advertisement

Quick Links

Download this manual
High Resolution Camera
User Manual
HCV-6080
HCO-6080

Advertisement

loading

Related Manuals for Hanwha Techwin Wisenet HCV-6080

Summary of Contents for Hanwha Techwin Wisenet HCV-6080

  • Page 1 High Resolution Camera User Manual HCV-6080 HCO-6080...
  • Page 2 Disclaimer Hanwha Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsi- bility.
  • Page 3 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
  • Page 4 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (Hanwha Techwin is not liable for problems caused by unauthorized modifications or attempted repair.) 10.
  • Page 5 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
  • Page 6 important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
  • Page 7 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.

  • Page 8: Table Of Contents

    contents INTRODUCTION Features Components and Accessories Component names and functions INSTALLATION Before installation Installation Adjusting the monitoring direction for the camera CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications CAMERA OPERATION Menu Configuration Menu Setup TROUBLESHOOTING Troubleshooting SPECIFICATIONS Specifications Dimension 8_ contents...

  • Page 9: Introduction

    introduction FEATURES y High Resolution Use of a 2.1 mega pixel CMOS device provides clear pictures with a resolution of 1920x1080. y Excellent Sensitivity - Color : 0.11Lux(F1.6, 1/30sec) B/W : 0.01Lux(F1.6, 1/30sec) y SSNR4 Function High performance DSP Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place.
  • Page 10 introduction COMPONENTS AND ACCESSORIES Check if the following items are included in the product package. <HCV-6080> Camera Quick Manual Template Tapping Screw Machine Screws L Wrench Card-type moisture Video Output Cable absorbent 10_ introduction...
  • Page 11 <HCO-6080> Camera Quick Manual Screws Card-type moisture Template Wrench absorbent Video Output Cable English_11...
  • Page 12 introduction COMPONENT NAMES AND FUNCTIONS HCV-6080 ❿ Dome Cover Rotate base : control rotating angle of camera. Vari-focal Lens Module : 3.2 ~ 10mm (F1.6). Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
  • Page 13 Front (HCO-6080) VIDEO Camera Sunshield Knob Sunshield : Fixing the sunshield onto the camera. Front cover Function Setup Switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. ` Simple Focus: Press the SET button for more than 2 seconds.
  • Page 14 Back (HCO-6080) Function jack (ALARM OUT, GND) VIDEO OUTPUT jack : Video signals are output through this port. Connect this port to the Video IN port of a AHD DVR. Power input terminal : Connect the power as specified for each model here. 14_ Installation...

  • Page 15: Installation 15

    Installation BEFORE INSTALLATION Ensure you read out the following instructions before installing the camera: y You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. y Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire.
  • Page 16 Installation Installing the camera on a ceiling or wall(HCV-6080) 1. Drill holes on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) (not included) fully into the holes. Fix the case bed on the ceiling by using screws .
  • Page 17 3. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera”section. 4. Close the dome cover. To ensure waterproofing, tight up the fixing bolts using the L-wrench. Dome Cover L Wrench The installation should be done by qualified service personnel or system installers. If the ceiling material is not strong enough to hold the installation screws, the camera may fall off.
  • Page 18 Installation ADJUSTING THE MONITORING DIRECTION FOR THE CAMERA <HCV-6080> Tilt Lens rotation ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation.

  • Page 19: Connection

    connection CONNECTING TO MONITOR Connect the Video OUT port on the rear panel of the camera to a AHD DVR. ALARM NETWORK BACKUP POWER AHD DVR HCV-6080 Monitor HCO-6080 ALARM NETWORK BACKUP POWER AHD DVR Monitor y As the connecting method varies with the instruments, refer to the manual supplied with the instrument.
  • Page 20 connection CONNECTING TO POWER You can connect power as shown in the following figure. Power Input Terminal HCV-6080 HCO-6080 Power Input Terminal When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m)
  • Page 21 y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera.  Standard voltage for camera operation : DC 12V±10%, AC 24V±10% ...
  • Page 22 connection - Video Cable The camera's video output port is connected to the DVR with a BNC coaxial cable, shown below. Recommended Cable Distance Specification 500m 5C2V It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.

  • Page 23: Camera Operation

    camera operation MENU CONFIGURATION MAIN SETUP ◦ ◦ ◦ VIDEO FORMAT ◦ CVBS ◦ ◦ ◦ BASIC DAY/NIGHT BACKLIGHT PROFILE ◦ ◦ ◦ INDOOR USER ◦ ◦ ◦ INDOOR OUTDOOR WHITE BAL ◦ ◦ AWC → SET MANUAL ◦ ◦ ◦...
  • Page 24 camera operation MAIN SETUP  1. VIDEO FORMAT Select the Change the status 2. PROFILE function using BASIC using the Function the Function 3. WHITE BAL Setup switch. Setup switch. 4. EXPOSURE 5. BACKLIGHT 6. SPECIAL 7. SIMPLE FOCUS 8. EXIT SAVE 1.
  • Page 25 PROFILE 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘PROFILE’ by using 1. VIDEO FORMAT the Function Setup switch so that the  2. PROFILE BASIC arrow indicates ‘PROFILE’ . 3. WHITE BAL 2. Select a desired mode using the 4.
  • Page 26 camera operation White Bal (White Balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘White Bal’ by using 1. VIDEO FORMAT the Function Setup switch so that the 2.
  • Page 27 EXPOSURE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’ . 2. Select a desired mode using the EXPOSURE SETUP Function Setup switch. BRIGHTNESS  IIIIIIIIII IIIIIIIIII y BRIGHTNESS : Adjusts the video LENS brightness.
  • Page 28 camera operation y AGC (OFF/LOW/MIDDLE/HIGH/VERY HIGH) : The higher the gain level, the brighter the screen - but the greater the noise. y SSNR4 : This function reduces the background noise in a low luminance environment. - OFF : Deactivates SSNR4. Noise is not reduced. - ON : Activates SSNR4 so that noise is reduced.
  • Page 29 y HLC (High Light Compensation) : This function masks the strong light to minimize HLC SETUP white out due to over exposure and preserve much LEVEL M I D D L E  of the on-screen details when the camera aims a LIMIT NIGHT ONLY strong light source.
  • Page 30 camera operation SPECIAL 1. When the SETUP menu screen is MAIN SETUP displayed, select ‘SPECIAL’ by using 1. VIDEO FORMAT the Function Setup switch so that the 2. PROFILE BASIC arrow indicates ‘SPECIAL’ . 3. WHITE BAL 2. Select a desired mode using the 4.
  • Page 31 - FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. y COAX : You can select whether to use COAX communication. y IMAGE ADJ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the ❶...
  • Page 32 camera operation y DAY/NIGHT: You can display pictures in color or in black and white. If the SPECIAL menu screen is displayed, use the Function Setup switch so that ➊ the arrow indicates ‘DAY/NIGHT’. Select a desired mode using the Function Setup switch according to the picture ➋...
  • Page 33 y DEFOG : You can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility. If the SPECIAL menu screen is displayed, use the Function Setup switch so that the ➊...
  • Page 34 camera operation y MOTION : This product generates signals each time an object movement is detected in the four areas of the screen so efficient monitoring can be achieved. If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow ➊...
  • Page 35 - If multiple movements keeps occurring randomly, such as scene switching or sudden light changes - If an object fixed in the same location keeps moving - Moving away from the camera or approaching the camera. Little location change on the screen.
  • Page 36 camera operation Holding Function Setup switch 2 seconds, simple focus would be performed. The simple focus function may not work well in the following cases. - Low illumination environment - Changing scene during focus adjustment (sudden movement, appearance or disappearance) - Sudden change of brightness during focus adjustment - Strong spot light in front of or near the subject In environments where focus adjustment is difficult, use the manual focus function.

  • Page 37: Troubleshooting

    troubleshooting TROUBLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected.
  • Page 38 specifications SPECIFICATIONS HCV-6080 HCO-6080 Video Imaging Device 1/2.8” 2M CMOS Effective Pixels 1945(H) x 1097(V) Scanning System Progressive Scan Color : 0.11Lux(F1.6, 1/30sec) Min. Illumination B/W : 0.01Lux(F1.6, 1/30sec) Video Output BNC(AHD / TVI / CVI / CVBS Selectable) Resolution 1920 x 1080 Max, Framerate 25fps(PAL)
  • Page 39 HCV-6080 HCO-6080 Analytics Motion detection Alarm I/O MD output 1ea Alarm Triggers Analytics Alarm Event Alarm output ACP (AHD Coax Protocol), TCP (TVI Coax Protocol), Coaxial Protocol CCP (CVI Coax Protocol), CVBS : Pelco-C (Coaxitron) Video Transmission 500m(5C2V Coaxial Cable) Distance Environmental Operating Temperature /...
  • Page 40 DIMENSION Unit: mm (inch) <HCV-6080> 40_ specifications...
  • Page 41 Unit: mm (inch) <HCO-6080> English_41...
  • Page 42 Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 www.hanwhasecurity.com...

This manual is also suitable for:

Wisenet hco-6080