Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hanwha Techwin Wisenet HCD-6070R
Summary of Contents for Hanwha Techwin Wisenet HCD-6070R
- Page 1 High Resolution Camera User Manual HCD-6070R HCV-6070R...
- Page 2 High Resolution Camera User Manual Copyright ©2017 Hanwha Techwin Co., Ltd. All rights reserved. Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company.
- Page 3 Before operating the camera, confirm the camera model and correct input power voltage. To help you understand this manual thoroughly, we'll introduce our model description. ■ HCD-6070R/HCV-6070R SERIES • NTSC MODEL • PAL MODEL HCD-6070R HCD-6070RP HCV-6070R HCV-6070RP ■ MODEL DESCRIPTION •...
- Page 4 safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.
- Page 5 9. If this product fails to operate normally, contact the nearest service center. never disassemble or modify this product in any way. (Hanwha Techwin is not liable for problems caused by unauthorized modifications or attempted repair.) 10.
- Page 6 safety information FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation.
- Page 7 important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers) that produce heat.
- Page 8 Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus Hanwha Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
-
Page 9: Table Of Contents
contents INTRODuCTION Features Components and Accessories Component names and functions INSTALLATION Before installation Installation Adjusting the monitoring direction for the camera CONNECTION Connecting to Monitor Connecting to Power Using Coaxial Communications CAMERA OPERATION Menu Configuration Menu Setup TROubLESHOOTING Troubleshooting SPECIFICATIONS Specifications Dimension English_9... -
Page 10: Introduction
introduction FEATuRES y High Resolution Use of a 2.1 mega pixel CMOS device provides clear pictures with a resolution of 1920x1080. y Excellent Sensitivity - Color : 0.11Lux (F1.6, 1/30sec) B/W : 0Lux(IR LED on) y SSNR4 Function High performance DSP Chip removes noises of GAIN resulting from the low light level and shows a vivid, high definition video even in the dark place. -
Page 11: Components And Accessories
COMPONENTS AND ACCESSORIES Check if the following items are included in the product package. <HCD-6070R> Camera Quick Manual Screws Template Video Output Cable English_11... - Page 12 introduction <HCV-6070R> Camera Quick Manual Template Tapping Screw Machine Screws L Wrench Card-type moisture Video Output Cable absorbent 12_ introduction...
-
Page 13: Component Names And Functions
COMPONENT NAMES AND FuNCTIONS HCD-6070R ⓭ ⓬ ⓫ ❿ Dome Cover Shield Case Rotate base : control rotating angle of camera. Vari-focal Lens Module : 3.2 ~ 10mm (F1.6). Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item. - Page 14 introduction HCV-6070R ⓬ ⓫ ❿ Dome Cover Rotate base : control rotating angle of camera. Vari-focal Lens Module : 3.2 ~ 10mm (F1.6). Function Setup switch : Display the menu on the screen and move the cursor to four directions to confirm status or after changing a selected item.
-
Page 15: Installation
Installation bEFORE INSTALLATION Ensure you read out the following instructions before installing the camera: y y You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. y y Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fire. -
Page 16: Installation
Installation Disassembling(HCV-6070R) Using the L-wrench provided, loosen 3 screws by turning them counterclockwise and separate the dome cover. L Wrench Dome Cover 16_ Installation... - Page 17 Installation(HCD-6070R) 1. Attach the installation template to the selected area and punch 2 holes as shown in the fi gure. 케이블 구멍 2. Use the 2 supplied screws to fi x the camera to the 2 punched holes. y Set the <TOP FRONT> mark imprinted on the camera to face the direction of camera monitoring.
- Page 18 Installation Installing the camera on a ceiling or wall(HCV-6070R) 1. Drill holes on the ceiling by matching to the holes on the case bed, and insert plastic anchors (HUD 5) (not included) fully into the holes. Fix the case bed on the ceiling by using screws .
- Page 19 3. Adjust the lens in a desired direction by referring to the “Adjusting the monitoring direction for the camera”section. 4. Close the dome cover. To ensure waterproofing, tight up the fixing bolts using the L-wrench. Dome Cover L Wrench The installation should be done by qualified service personnel or system installers. If the ceiling material is not strong enough to hold the installation screws, the camera may fall off.
-
Page 20: Adjusting The Monitoring Direction For The Camera
Installation ADJuSTING THE MONITORING DIRECTION FOR THE CAMERA <HCD-6070R> Tilt Lens rotation <HCV-6070R> Tilt Lens rotation 20_ Installation... - Page 21 ` Adjusting the monitoring direction You can adjust the camera direction only when the camera is fixed on the ceiling. Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the lens on its axis is called Rotation. y - The effective range of pan is a total of 350 degrees.
-
Page 22: Connection
connection CONNECTING TO MONITOR Connect the Video OUT port on the rear panel of the camera to a AHD DVR. ALARM NETWORK BACKUP POWER AHD DVR HCD-6070R Monitor ALARM NETWORK BACKUP POWER AHD DVR HCV-6070R Monitor y As the connecting method varies with the instruments, refer to the manual supplied with the instrument. -
Page 23: Connecting To Power
CONNECTING TO POWER You can connect power as shown in the following figure. Power Input Terminal HCD-6070R Power Input Terminal HCV-6070R When the resistance value of copper wire is at [20°C(68°F)] Copper wire size (AWG) #24 (0.22mm #22 (0.33mm #20 (0.52mm #18 (0.83mm Resistance value(Ω/m) 0.078... -
Page 24: Using Coaxial Communications
connection y As shown in the table above, voltage decreases as the wire gets longer. Therefore use of an excessively long adaptor output line for connection to the camera may affect the performance of the camera. Standard voltage for camera operation : DC 12V±10%, AC 24V±10% ... - Page 25 - Video Cable The camera's video output port is connected to the DVR with a BNC coaxial cable, shown below. Recommended Cable Distance Specification 500m 5C2V It is recommended that pure copper coax cable is used and not copper coated steel, as this will cause issues with the communication over the coaxial cable.
-
Page 26: Camera Operation
camera operation MENu CONFIGuRATION MAIN SETuP ◦ ◦ ◦ VIDEO FORMAT ◦ CVBS ◦ ◦ ◦ BASIC DAY/NIGHT BACKLIGHT PROFILE ◦ ◦ ◦ INDOOR USER ◦ ◦ ◦ INDOOR OUTDOOR WHITE BAL ◦ ◦ AWC → SET MANUAL ◦ ◦ ◦... - Page 27 MAIN SETuP 1. VIDEO FORMAT Select the Change the status function using 2. PROFILE bASIC using the Function the Function Setup switch. 3. WHITE bAL Setup switch. 4. EXPOSuRE 5. bACKLIGHT 6. SPECIAL 7. EXIT SAVE 1. Press the Function Setup switch. y Main SETUP menu is displayed on the monitor screen.
- Page 28 camera operation PROFILE 1. When the SETUP menu screen is MAIN SETuP displayed, select ‘PROFILE’ by using 1. VIDEO FORMAT the Function Setup switch so that the 2. PROFILE bASIC arrow indicates ‘PROFILE’ . 3. WHITE bAL 2. Select a desired mode using the 4.
- Page 29 White bal (White balance) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is MAIN SETuP displayed, select ‘White Bal’ by using 1. VIDEO FORMAT the Function Setup switch so that the 2. PROFILE bASIC arrow indicates ‘White Bal’...
- Page 30 camera operation EXPOSuRE 1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the Function Setup switch so that the arrow indicates ‘EXPOSURE’ . 2. Select a desired mode using the EXPOSuRE SETuP Function Setup switch. bRIGHTNESS IIIIIIIIII IIIIIIIIII y bRIGHTNESS : Adjusts the video...
- Page 31 y AGC (OFF/LOW/MIDDLE/HIGH/VERY HIGH) : The higher the gain level, the brighter the screen - but the greater the noise. y SSNR4 : This function reduces the background noise in a low luminance environment. - OFF : Deactivates SSNR4. Noise is not reduced. - ON : Activates SSNR4 so that noise is reduced.
- Page 32 camera operation y HLC (High Light Compensation) : This function masks the strong light to minimize HLC SETuP white out due to over exposure and preserve much ▶ LEVEL M I D D L E of the on-screen details when the camera aims a LIMIT NIGHT ONLY strong light source.
- Page 33 SPECIAL 1. When the SETUP menu screen is MAIN SETuP displayed, select ‘SPECIAL’ by using 1. VIDEO FORMAT the Function Setup switch so that the 2. PROFILE bASIC arrow indicates ‘SPECIAL’ . 3. WHITE bAL 2. Select a desired mode using the 4.
- Page 34 camera operation - FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue) - LANGUAGE : You can select the menu language according to your requirements. - RETURN : Return to the SPECIAL menu. y COAX : You can select whether to use COAX communication. y IMAGE ADJ If the SPECIAL menu screen is displayed, use the Function Setup switch so that the ❶...
- Page 35 y DAY/NIGHT: You can display pictures in color or in black and white. If the SPECIAL menu screen is displayed, use the Function Setup switch so that ➊ the arrow indicates ‘DAY/NIGHT’. Select a desired mode using the Function Setup switch according to the picture ➋...
- Page 36 camera operation y DEFOG : You can use the defog mode to allow the camera to automatically detect the fog density of the screen and display a clear image despite smog, fog or general poor visibility. If the SPECIAL menu screen is displayed, use the Function Setup switch so that the ➊...
- Page 37 y MOTION : This product generates signals each time an object movement is detected in the four areas of the screen so efficient monitoring can be achieved. If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow ➊...
- Page 38 camera operation - If there is little movement near the screen edge - If multiple movements keeps occurring randomly, such as scene switching or sudden light changes - If an object fixed in the same location keeps moving - Moving away from the camera or approaching the camera. Little location change on the screen.
-
Page 39: Troubleshooting
troubleshooting TROubLESHOOTING If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problems Troubleshooting Nothing appears on the screen. y Check that the power cord and line connection between the camera and monitor are properly connected. -
Page 40: Specifications
specifications SPECIFICATIONS HCD-6070RN/HCD-6070RP HCV-6070RN/HCV-6070RP Video Imaging Device 1/2.8” 2M CMOS Total Pixels 1,945(H) x 1,109(V) 2.16M pixels Effective Pixels 1,945(H) x 1,097(V) 2.13M pixels Scanning System Progressive Scan Color : 0.11Lux (F1.6) (30IRE) Min. Illumination B/W : 0Lux(IR LED on) S / N Ratio 52dB (AGC off, Weight on) Video Output... - Page 41 HCD-6070RN/HCD-6070RP HCV-6070RN/HCV-6070RP Privacy Masking Off / On (8 zones rectangle) Gain Control Off / Low / Middle / High / Very High White balance ATW / Outdoor / Indoor(4,500K° ~ 8,500K°) / Manual / AWC (1,800K° ~ 10,500K°) Electronic Shutter Speed 1 sec ~ 1/12,000 sec Reverse Off / H-Rev / V-Rev / HV-Rev...
-
Page 42: Dimension
DIMENSION Unit: mm (inch) <HCD-6070R> 42_ specifications... - Page 43 Unit: mm (inch) <HCV-6070R> English_43...
- Page 44 Head Office 6, Pangyo-ro 319 beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA Tel : +82.70.7147.8753 Fax : +82.31.8018.3740 www.hanwha-security.com Hanwha Techwin America 500 Frank W. Burr Blvd. Suite 43 Teaneck, NJ 07666 Toll Free +1.877.213.1222 Direct +1.201.325.6920 Fax +1.201.373.0124 www.hanwha-security.com...